Contact Us

Wuxi Lantian Special Fan Factory

Tel:+86-510-83319383

Fax:+86-510-83301890

Mob:+86-18851570668

E-mail:18851570668@163.com

Web:http://www.wxltfan.com

Add:Huishan District Yuqi Town Industrial Park, Wuxi City, Jiangsu Province

Home > Knowledge > Content
High pressure centrifugal blower has small mechanical wear and use function May 05, 2018

The high pressure centrifugal blower will have its dual function of blowing and sucking in the process of operation, and it can be used as a dual-purpose machine to a certain extent. In use, it can use suction or blowing, and can also be used in the process of operation. Suction and blowing, to a certain degree, are equivalent to rotary vane vacuum pumps.

The high pressure centrifugal blower is oil-less or oil-free in operation to a certain extent. The air output from the high-pressure centrifugal blower is clean during operation. Compared with the centrifugal blower and medium-pressure blower, the pressure is much higher. Centrifugal fans are often more than 10 times, the current maximum pressure up to 230KPA.

If the high-pressure centrifugal blower is an integral casting of its pump body, it can effectively mount the foot in the process of use, so that the requirements for the installation foundation will be very low, and even a fixed foot can be used to a certain extent. Normal operation is very convenient, and it also saves installation costs and installation cycle.

High-pressure centrifugal blowers are to a certain extent relative to other types of fans, and their operating noise is lower when they are operated. The larger the power is, the more obvious the power is. Above 5.5KW will be displayed, maintenance-free use; its loss parts are only two The bearings are basically maintenance-free within the warranty period.

The mechanical abrasion of the high-pressure centrifugal blower is very slight. In addition to the bearing, there is no other mechanical contact portion to a certain extent during the operation. Therefore, the service life is also very long, as long as it is under normal conditions of use. In the next 3 to 5 years, there is no problem at all. This is also the biggest reason for the popularity of high pressure fans in China.

In the process of operation, the high pressure centrifugal blower needs to effectively ensure the function of the high pressure blower. Whether it is sucking or blowing, to a certain extent, it is necessary to identify the corresponding pressure-flow curve of the high pressure blower; if the wrong curve is observed, It will cause the selected product to not be used.

http://www.wxltfan.com/